Water-Repellent Velvet Sofa Cover - L-Shaped

$184.48

Size Small Medium Large X-Large

CorWarm Ivory

VELVET COLLECTION

Water-Repellent Velvet Protective Cover for L-Shaped Sectional Sofas with Chaise

Refresh the look of your L-shaped sectional while adding an extra layer of protection against everyday spills, dirt, pet hair and wear.

Made from water-repellent velvet, this cover combines the elegant appearance of velvet with a specially treated surface that helps keep liquids on the surface long enough to be wiped away.

The set consists of two loose, rectangular cover pieces designed to cover the main sofa section and chaise, including the seat, backrest and armrests, depending on the size selected and how the pieces are positioned.

Please measure both sections of your sectional carefully before ordering. This cover is available in standard sizes and is not custom-made.

DESIGNED FOR L-SHAPED SECTIONALS

This cover is designed specifically for L-shaped sectional sofas with two separate sections that meet at the chaise.

The two cover pieces are designed to meet and tuck into the gap where the chaise and main sofa section connect.

Important: Your sectional must have a usable gap between the two sections where the cover edges can be tucked in securely.

This cover is not designed for one-piece sofas without a separate chaise section.

WHY YOU'LL LOVE IT

Water-Repellent Velvet

The specially treated velvet surface helps repel liquids, allowing many everyday spills to remain on the surface rather than soaking in immediately.

Simply wipe the spill away promptly with a dry or soft cloth.

Helps Protect Against Everyday Messes

The covers add an extra layer between your sectional upholstery and everyday dirt, pet hair, crumbs, spills and general wear.

Pet-Friendly Protection

The firmer velvet surface makes loose pet hair easier to gather and remove from the covers, helping keep your sectional upholstery cleaner.

Elegant Velvet Look

Enjoy the sophisticated appearance of velvet while adding practical everyday protection to your sectional.

Simple, Strap-Free Design

No zippers, straps or complicated installation.

Simply place each cover piece over its corresponding section of the sectional and tuck the fabric into the natural gaps and folds.

PLEASE NOTE: FIRMER FABRIC & NATURAL DRAPE

Unlike soft, fluid velvet fabrics, this water-repellent velvet has a firmer structure due to its protective finish.

As a result, the fabric may not drape or conform to the contours of the sectional as softly as traditional velvet. You may notice more defined folds, structure or slight stiffness when the covers are placed over the sectional.

This is a natural characteristic of the fabric and should be expected.

For the best appearance, carefully tuck and adjust each cover piece into the sectional's natural gaps and corners.

TWO-PIECE DESIGN

The L-shaped sectional cover consists of two separate rectangular cover pieces:

• 1 × Main Sofa Section Cover
• 1 × Chaise Section Cover

The two pieces are designed to work together to provide flexible coverage across your L-shaped sectional.

Because the pieces are separate, each section can be adjusted independently for a better fit.

DESIGNED FOR EASY, FLEXIBLE COVERAGE

These are protective sofa covers designed to be placed over the sectional's main contact surfaces.

The two pieces are designed to cover the seat, backrest and armrests of the main sofa and chaise sections, depending on the size selected and how the pieces are positioned.

Please note: These are not fitted slipcovers and do not completely enclose the sectional. Some areas of the original upholstery may remain exposed.

FIND YOUR SIZE

Measure Both Sections Before Ordering

Do not choose your size based solely on the number of seats or the overall size of your sectional.

For an L-shaped sectional, both the main sofa section and the chaise section must be measured separately.

Measure both sections using the A and B measurements shown in our measuring guide and compare them with the cover dimensions before placing your order.

Cover dimensions are listed as B × A:
• B = Side-to-Side Coverage
• A = Front-to-Back Coverage

Each cover piece is sized according to the measurements of the section it is designed to cover.

Our L-shaped sectional cover sets are available in standard sizes designed to accommodate different sectional dimensions.

Please use the measurement guide to determine the appropriate size for both sections of your sectional.

WATER-REPELLENT SURFACE

How It Handles Spills

1. SPILL

Liquid comes into contact with the water-repellent velvet surface.

2. STAYS ON THE SURFACE

The treated surface helps keep the liquid from penetrating immediately.

3. WIPE

Wipe the liquid away promptly with a dry or soft cloth.

Important: This cover is water-repellent, not waterproof. Liquids left on the surface for an extended period may eventually penetrate the fabric.

For best results, clean spills as soon as they occur.

CARE & CLEANING

Everyday Cleaning

For liquid spills, gently wipe or blot the surface with a clean, dry or soft cloth.

For small stains or localized dirt, use a lightly damp cloth with mild soap.

Avoid excessive moisture when cleaning.

Important Care Instructions

Do not machine wash.
Do not tumble dry.
Do not soak in water.
Do not centrifuge or wring.
Do not use harsh chemicals or abrasive cleaners.
Avoid excessive moisture during cleaning.

Excessive washing or soaking may affect the fabric's water-repellent finish.

Ironing

If ironing is necessary, use low or medium heat and iron only on the reverse side of the fabric.

Do not apply direct heat to the water-repellent velvet surface.

SEAM / FABRIC EXTENSION

ABOUT THE SEAM

Each cover piece is made with a sewn fabric extension because the available fabric width is not sufficient to create the full cover in one continuous piece.

The seam is a normal characteristic of the cover's construction.

The seam can be positioned near the front edge of the seat or turned toward the back of the sofa, depending on how you choose to arrange the cover.

MATERIAL

Material: Water-Repellent Velvet

The cover features a water-repellent velvet surface with a firmer structure and a different feel and drape from softer, traditional velvet fabrics.

The covers are designed to be used with the water-repellent velvet side facing up. The reverse side has a different texture and finish.

IMPORTANT TO KNOW

This cover is not custom-made. Please select the appropriate standard size based on your sectional's measurements.
This product consists of two separate cover pieces designed for the main sofa and chaise sections.
Your sectional must have a usable gap between the two sections where the cover edges can be tucked in.
The covers are designed to be placed over the sectional and tucked into its natural gaps and folds.
The covers may require occasional readjustment during use.
The firmer structure of this fabric may result in a more structured appearance and less fluid drape than softer velvet fabrics.
On smooth upholstery such as genuine leather or other slick surfaces, the covers may shift more easily than on fabric upholstery.
For best results, tuck the covers securely into the sectional's natural gaps and corners.
This product is intended to help protect your sectional from everyday messes, including spills, dirt and pet hair.
It is not designed to provide complete or permanent protection against liquids, stains, scratches or pet damage.
To help preserve the water-repellent finish, do not machine wash, soak or excessively wet the covers.